Vega and Blaze Color Singles Firmware Upgrade Instructions
Attached is the Firmware Upgrade Instruction for the 2 1/4" Vega Color Singles and 3 1/8" Blaze Color Singles.
Note: You will also need to download the STM Flasher at this link: https://www.st.com/en/development-tools/flasher-stm32.html
NOTE: Please use a USB to RS-232 cable that uses an FTDI-brand chipset, and NOT a Prolific chipset.
Related Articles
Vega and Blaze Color Singles Firmware Upgrade Instructions
Attached is the Firmware Upgrade Instruction for the 2 1/4" Vega Color Singles and 3 1/8" Blaze Color Singles. Note: You will also need to download the STM Flasher at this link: https://www.st.com/en/development-tools/flasher-stm32.htmlBlaze, Vega, Vega Control, Razor Updates
Updating the lineup of Blaze, Vega, Vega Control and Razor VHF/Intercom devices is done via RS-232 on a PC. Due to the generally increased complexity of updating these products, we advise our customers to contact us and setup an appointment to send ...Blaze Single Manuals
Attached are the manuals of the 3 1/8" Blaze Color Singles (Last Updated 11/16/2021) Applies to: AHRS-2 AHRS-4 ALT-6 ALT-7 ASI-5 ASV-2 EMS-2 FF-5 INFO-2 MAP-4 RPM-2 TC-5 TC-6 TP-4Vega Single Manuals
Attached are the manuals of the 2 1/4" Vega Color Singles Applies to: AHRS-1 AHRS-3 ALT-5 ASI-4 ASV-1 EMS-1 FF-4 INFO-1 MAP-3 RPM-1 TC-4 TP-3What are the dimensions of the Blaze Singles?
Attached are the dimensions / size of the 3 1/8" Blaze Color Singles Applies to: AHRS-2 ALT-6 ALT-7 ASI-5 ASV-2 FF-5 INFO-2 MAP-4 RPM-2 TC-5 TC-6 TP-4