Floscan Fuel Flow Sensor Manual
Attached is the Floscan 201A-6, 201B-6, 201C-6 Manual
SAFETY WARNING: Never use RTV or similar sealants when installing Floscan senders or any fuel system components.
Sealants can get into the fuel system and cause fuel starvation.
Related Articles
Fuel Flow Sensor (Plastic Model) Manual
Attached is the manual for the plastic Fuel Flow Sensor.Fuel Flow Sensor Common Problems (Plastic Model)
The most common problems with the plastic fuel flow sensor not giving a reading (or given a low reading) are: Restrictor jet not installed correctly: The small restrictor jet is included with the flow sensor and needs to be installed in engines with ...What is the K-Factor of the Floscan Fuel Flow Sensor?
Each Floscan model 201A-6, 201B-6 or 201C-6 is shipped with a tag attached to it. This tag has a number that looks something like this: 16-3200 What this means is that the sensor was calibrated at 16 GPH to have a K-factor of 32,000 (you have to ...Fuel Flow Sensor (plastic) K-factors and Jet Sizes
Please see the attached table for K-factors and Jet Sizes for the plastic Fuel Flow Sensor: Fuel Flow Sensor Jet Sizes l/Gal Flow Rates 3.785 l/Min Gal/hr Min Max Min Max K-Factor Jet (803) 1mm 0.05 0.5 0.8 7.9 17000 Jet (815) 2mm 0.10 1.5 1.6 23.8 ...FT-60 Red Cube (and FT-90 Gold Cube) Fuel Flow Sensor Manuals
FT-60 Red Cube (and FT-90 Gold Cube) Fuel Flow Sensor Manuals