Fuel Flow Sensor (Plastic Model) Manual

Fuel Flow Sensor (Plastic Model) Manual

Attached is the manual for the plastic Fuel Flow Sensor.




    • Related Articles

    • Fuel Flow Sensor Common Problems (Plastic Model)

      The most common problems with the plastic fuel flow sensor not giving a reading (or given a low reading) are: Restrictor jet not installed correctly: The small restrictor jet is included with the flow sensor and needs to be installed in engines with ...
    • Fuel Flow Sensor (plastic) K-factors and Jet Sizes

      Please see the attached table for K-factors and Jet Sizes for the plastic Fuel Flow Sensor: Fuel Flow Sensor Jet Sizes l/Gal Flow Rates 3.785 l/Min Gal/hr Min Max Min Max K-Factor Jet (803) 1mm  0.05 0.5 0.8 7.9 17000 Jet (815) 2mm  0.10 1.5 1.6 23.8 ...
    • Floscan Fuel Flow Sensor Manual

      Attached is the Floscan 201A-6, 201B-6, 201C-6 Manual SAFETY WARNING: Never use RTV or similar sealants when installing Floscan senders or any fuel system components. Sealants can get into the fuel system and cause fuel starvation.
    • FT-60 Red Cube (and FT-90 Gold Cube) Fuel Flow Sensor Manuals

      FT-60 Red Cube (and FT-90 Gold Cube) Fuel Flow Sensor Manuals
    • IOX Manual

      Attached is the manual for the In/Out Extender / IOX / IOEX ​