iEFIS Analog and Digital Inputs and Outputs Manual
Attached is the manual for the iEFIS and iEFIS Lite analog and digital inputs and outputs.
Note: some of these require the iEFIS Extender module
Related Articles
iBox and iEFIS Extender Analog Inputs Remote Control Functions
The iBox and iEFIS Extender Analog Inputs have a selection of Remote Control Functions available by selection. These functions are normally activated with hat switches and buttons on the control stick. Applying Power to one of the Analog/Digital ...iEFIS Extender Manual and Harness Schematics
Attached is the manual for the iEFIS Extender that can be used with the iEFIS (Discovery, Explorer and Challenger) and iEFIS Lite (Discovery-Lite, Explorer-Lite and Challenger-Lite) to add additional analog inputs and outputs as well as adding ...iBox and iEFIS Extender Analog Inputs requiring Ground Switch to activate remote functions
The iBox and iEFIS Extender Analog inputs require momentary contact with Power (12 Volts) to activate the various remote control functions available (check in Digital Inputs setup - example below). These functions are normally activated with hat ...IOX Manual
Attached is the manual for the In/Out Extender / IOX / IOEX iEFIS Plates Manual
Attached is the iEFIS and iEFIS-Lite Plates manual