iEFIS Generation 3 Updates

iEFIS Generation 3 Updates

The latest iEFIS G3 Software updates are contained here. These updates apply to the regular iEFIS G3 and the iEFIS Lite.

iEFIS G2 Users can find their updates here
iEFIS MX1 Users can find their updates here

Current version:

iEFIS G3 Application Software: A 1.1.0.3
FlightOps System G3 iEFIS: 1.0.0.3
iBOX Firmware Version: 21

Also Included:

SP-10 Version 080714
RDAC XF Version 310714
SP-12 Version 100119
TRIG Interface Version 250919

Changes (iEFIS):

13 March 2020 Version 1.1.0.3


Added: Selection of baudrates for ADS-B devices - to support 38400 baudrate for the popular Stratux range of ADS-B receivers without the need to “hack” them to change their default baudrate. Added to ADS-B setup menu.

Fixed: iEFIS Lite, latest generation uBlox GPS receiver can blank out satellite bars in viewer if it is tracking a large number of satellites - this does not affect normal operation, only the GPS status viewer.


Changes (iBOX):

Version 21 fixes a calculation error related to using the non-linear ASI correction functions below 50mph or airspeed. Note: this update is only relevant if you use these functions in the instruments setup menu.

Installation:

To install, download the update package which contains software for all iEFIS components and update instructions. 
    • Related Articles

    • iEFIS Generation 2 Updates

      The latest iEFIS G2 Software updates are contained here. These updates apply to the regular iEFIS Challenger and Explorer G2. iEFIS G3 Users can find their updates here iEFIS MX1 Users can find their updates here Current version: iEFIS G2 Application ...
    • XTreme Generation 1 Updates

      Here you will find updates for your XTreme EFIS and EMS Generation 1 units.  If you have a Generation 2 unit please check the Gen 2 XTreme Update page here You can tell the difference by looking at the version number at startup. If you have a ...
    • XTreme Generation 2 Updates

      Here you will find updates for your XTreme EFIS and EMS Generation 2 units.  If you have a Generation 1 unit please check the Gen 1 XTreme Update page here You can tell the difference by looking at the version number at startup. If you have a ...
    • iEFIS MX1 Updates

      The latest iEFIS MX1 Software updates are contained here. These updates apply to the iEFIS MX1 in either Landscape or Portrait modes. NOTE: Landscape Mode software updates contain "LS" in the file names. iEFIS G2 Users can find their updates here ...
    • V16 Radio Updates

      The MGL Avionics V16 Radio firmware updates can be found here. Current Version: 300420 (Version 12) Changes: V16 Firmware update 300420 (V1 REL 12) Added a block to AUX audio at codec level during TX. Added automatic selection of HOT MIC during TX if ...