iEFIS Lite Harness Wiring Schematics

iEFIS Lite Harness Wiring Schematics

Attached is the schematic for the available iEFIS Lite wiring harness. This harness can be used for the Discovery-Lite, Explorer-Lite and Challenger-Lite. It contains the Power/Ground connections, CAN bus connections and RS-232 connections.


​

    • Related Articles

    • iEFIS Harness Wiring Schematics

      Attached are iEFIS / iBox CAN bus harness schematics that detail connecting up the system. The iBox is connected to all devices, such as the AHRS SP-7 and SP-6, the autopilot servos, the RDAC XF, etc., via the CAN bus. There are 2 CAN buses per iBox ...

    • iEFIS Extender Manual and Harness Schematics

      Attached is the manual for the iEFIS Extender that can be used with the iEFIS (Discovery, Explorer and Challenger) and iEFIS Lite (Discovery-Lite, Explorer-Lite and Challenger-Lite) to add additional analog inputs and outputs as well as adding ...

    • V6 Radio Harness Schematics

      Attached are harness schematics for connecting up Single Place, 2-place and 4-place harnesses for wiring the V6 Radio ​

    • V10 Radio Harness Schematics

      Attached are harness schematics for connecting up Single Place, 2-place and 4-place harnesses for wiring the V10 Radio (and a dual radio harness schematic) ​

    • Transponder Encoder Harness Schematics

      Attached are Schematics for wiring connections for connecting the MGL Avionics iEFIS, Odyssey, Voyager, Enigma EFIS to the following transponders: Garmin GTX320A Garmin GTX327 Garmin GTX330 Bendix/King KT-76A Microair T2000