iEFIS Lite Pitot Static Tube adapters
iEFIS Lite units shipped in the USA have 3/32" to 3/16" pitot/static tube adapters included in the box. These allow the user to connect the pitot and static ports on the iEFIS Lite to a more standard 3/16" Inside Diameter hose. Ensure that these hoses are secured in such a way that no kinking of these lines is possible.
Related Articles
iEFIS Lite User Manual
The iEFIS Lite Manual, Getting Started and Quick Calibration is attached. This should be used in collaboration with the standard iEFIS manuals found here.iEFIS Lite Harness Wiring Schematics
Attached is the schematic for the available iEFIS Lite wiring harness. This harness can be used for the Discovery-Lite, Explorer-Lite and Challenger-Lite. It contains the Power/Ground connections, CAN bus connections and RS-232 connections. iEFIS Discovery-Lite Weights and Current Draws
Below are the system weights and Current loads of the iEFIS Discovery-Lite. We recommend putting all EFIS-Lite system components on a 3 or 5 Amp Circuit Breaker. If radio and transponder are used, these can be placed on another 5 Amp Circuit breaker. ...iEFIS-Lite to V10 RS-232 Connection Diagram
Below is the connection diagram diagram for the iEFIS-Lite to V10 Com Radio. You can use either RS-232 Port 1 OR RS-232 Port 2 on the iEFIS-Lite (Discovery-Lite, Explorer-Lite, Challenger-Lite) Connect either RS-232 on the iEFIS-Lite to RS-232 Port 1 ...iEFIS-Lite to V6 RS-232 Connection Diagram
Below is the connection diagram diagram for the iEFIS-Lite to V6 Com Radio. You can use either RS-232 Port 1 OR RS-232 Port 2 on the iEFIS-Lite (Discovery-Lite, Explorer-Lite, Challenger-Lite). You can also use any of the RS-232 Ports on the iEFIS ...