iEFIS Video Showing What is in the Box, and CAN bus wiring
Video showing what you get in the box when you order an iEFIS with iBox. Video also describes how our available harness system connects devices on the CAN bus network.
Related Articles
iEFIS Lite Harness Wiring Schematics
Attached is the schematic for the available iEFIS Lite wiring harness. This harness can be used for the Discovery-Lite, Explorer-Lite and Challenger-Lite. It contains the Power/Ground connections, CAN bus connections and RS-232 connections.
iEFIS Harness Wiring Schematics
Attached are iEFIS / iBox CAN bus harness schematics that detail connecting up the system. The iBox is connected to all devices, such as the AHRS SP-7 and SP-6, the autopilot servos, the RDAC XF, etc., via the CAN bus. There are 2 CAN buses per iBox ...
MGL Black Box Data Feed
The MGL Odyssey/Voyager Gen 2 and all iEFIS systems have an available RS-232 'black box' data output that outputs all data continuously. The manual is attached.
UMA Fuel Pressure Sender Settings and Wiring
Attached are settings and wiring connections for the UMA Fuel Pressure Senders. This can be used to help if you are experiencing problems or if you suspect your fuel pressure sender is reading incorrectly. Remember to follow these 3 Steps when ...
VDO Oil Pressure Sender Settings and Wiring
Attached are settings and wiring connections for the commonly-used VDO Oil Pressure Sender. This can be used to help if you are experiencing problems or if you suspect your oil pressure sender is reading incorrectly. Remember to follow tthese 3 ...