MGL COM Radio Serial Communication Protocol

• Related Articles

• MGL V16 Com Radio Connection to iBox (iEFIS system)

  To connect an MGL Avionics V16 radio to the iBox for remote control and remote frequency selection, please use this example schematic below (setups at bottom of page). Notes: Use iBox RS-232 channels 3, 4 or 5 (save channels 1 and 2 for high speed ...

• MGL V6 and V10 Com Radio Connection to iBox (iEFIS system)

  To connect an MGL Avionics V6 or V10 radio to the iBox for remote control and remote frequency selection, please use this example schematic below (setups at bottom of page). Notes: Use iBox RS-232 channels 3, 4 or 5 (save channels 1 and 2 for high ...

• MGL CAN Bus Protocol

  Attached is the CAN bus protocol document that outlines the communication of devices on the MGL CAN bus, such as the SP-6, SP-7, RDAC XF, Servos, Transponder

• V6 Com Radio Setup and Quick Reference

  Here are the steps to setup the V6 Com radio and adjust the settings:  Step 1: Adjust volume until you can receive a radio station clearly Step 2: Set the MIC level (while talking into the mic) until bar graph goes 2/3 of the way across the range  ...

• MGL Avionics V16 Com Radio Manual

  Attached is the manual for the MGL Avionics V16 Remote Aviation Transceiver ​