Old SP-2 and SP-4 Pinouts

Old SP-2 and SP-4 Pinouts

Here are wiring connections for the DB9 connector pins for the SP-2 magnetometer and the SP-4 or SP-5 attitude sensor (AHRS)

​

    • Related Articles

    • SP-6 and SP-7 Pinouts - Wiring

      Here are wiring connections for the DB9 connector pins for the SP-6 magnetometer and the SP-7 attitude sensor (AHRS)

    • SP-6 and SP-7 Installation Manual

      The SP-6 and SP-7 User and Installation Manual is attached for customers wishing to install these units in their aircraft

    • SP-9 AHRS Manual

      Attached is the manual for the SP-9 AHRS Sensor. SP-9 AHRS High grade ring gyro based AHRS and built in SP-6 magnetometer for magnetic heading. The SP-9 employs latest micro-machined ring gyroscope technology for performance that approaches FOG class ...

    • SP-10 Trim and Flap Controller Manual

      The manual for the MGL Avionics SP-10 Trim and Flap controller is attached. Each SP-10 can handle 2 functions (for example pitch and roll trim, or pitch trim and flaps).

    • SP-6 In-Flight Calibration Manual

      The manual for the SP-6 Magnetometer Magnetic Compass In-Flight Calibration procedure is attached. This outlines the process for updating and calibrating the SP-6 with the newer in-flight calibration software.