RDAC XB and XD Reference Ground to Engine Block
With the RDAC XB or XD, the Reference Ground wire is the Black Ground wire that comes out the top of the RDAC, together with the Red Power Supply Wire. This wire should go straight to the Engine Block. Note: It is acceptable to Setup a Ground Bus on ...
Attached is the manual for the In/Out Extender / IOX / IOEX
RDAC VD Manual
Attached is the RDAC VD Manual
RDAC XF and RDAC XF MAP Manual
Attached is the RDAC XF and RDAC XF MAP Manual
RDAC XG Manual
Attached is the manual for the RDAC XG. The RDAC XG is a compact version of the RDAC XF Engine monitor module and can be used used with XTreme, Odyssey G2, Voyager G2 and all iEFIS systems. The RDAC XG provides a CAN bus interface. Further to this an ...