Setting up an MGL V16 with an audio Panel

Setting up an MGL V16 with an audio Panel

There are some common issues our customers run into when hooking the V16 up to an audio panel. This video will explain some of these common pitfalls and how to overcome them.


    • Related Articles

    • Using the V16 VHF COM Radio with an Audio Panel

      The V16 VHF radio is a great companion with audio panels and external intercoms alike. When installing a V16 radio with the intention of using it behind an audio panel or intercom, it is important to properly configure the V16's settings for optimal ...
    • MGL V16 Com Radio Connection to iBox (iEFIS system)

      To connect an MGL Avionics V16 radio to the iBox for remote control and remote frequency selection, please use this example schematic below (setups at bottom of page). Notes: Use iBox RS-232 channels 3, 4 or 5 (save channels 1 and 2 for high speed ...
    • MGL V6 and V10 Com Radio Connection to iBox (iEFIS system)

      To connect an MGL Avionics V6 or V10 radio to the iBox for remote control and remote frequency selection, please use this example schematic below (setups at bottom of page). Notes: Use iBox RS-232 channels 3, 4 or 5 (save channels 1 and 2 for high ...
    • MGL Fuel Level Sender Calibration

      MGL Avionics Capacitance Fuel Level Sender Calibration  Senders are produced by Centroid Products MGL Avionics sell several standard lengths of capacitance probe (12" and 24" long). The senders can be bent above the black mark on the probe (first ...
    • iEFIS Panel Dimensions

      Attached are the cutout panel dimensions and sizes of the iEFIS Challenger, Explorer and Discovery (Lite versions are the same size as regular units).