SP-10 Trim and Flap Controller Manual

SP-10 Trim and Flap Controller Manual

The manual for the MGL Avionics SP-10 Trim and Flap controller is attached. Each SP-10 can handle 2 functions (for example pitch and roll trim, or pitch trim and flaps).

    • Related Articles

    • IOX Manual

      Attached is the manual for the In/Out Extender / IOX / IOEX ​

    • Connecting a Ray Allen RAC Trim or Flap Sensor to EFIS

      Attached is the manual for attaching a Ray Allen Trim or Flap Servo Sensor to the IOX for display on an Enigma, Voyager or Odyssey EFIS ​

    • SP-6 and SP-7 Installation Manual

      The SP-6 and SP-7 User and Installation Manual is attached for customers wishing to install these units in their aircraft

    • SP-9 AHRS Manual

      Attached is the manual for the SP-9 AHRS Sensor. SP-9 AHRS High grade ring gyro based AHRS and built in SP-6 magnetometer for magnetic heading. The SP-9 employs latest micro-machined ring gyroscope technology for performance that approaches FOG class ...

    • SP-10 Used For Pitch Trim with Ray Allen trim servo motor

      Below is a schematic diagram of an SP-10 used for Pitch Trim only with a Ray Allen servo. When used with an MGL Avionics iEFIS and MGL Avionics autopilot servos, this setup will allow auto-trim of the aircraft when under autopilot control. ​