V10 Radio Harness Schematics

Attached are harness schematics for connecting up Single Place, 2-place and 4-place harnesses for wiring the V10 Radio (and a dual radio harness schematic)

​

• Related Articles

• V6 Radio Harness Schematics

  Attached are harness schematics for connecting up Single Place, 2-place and 4-place harnesses for wiring the V6 Radio ​

• V16 and Razor/Vega Harness Schematics

  Attached are harness schematics for connecting up a 2-place (or single place) harness for wiring the V16 COM Radio and connecting to Razor and Vega Control Heads. Harness available for purchase from MGL Avionics. ​

• N16 and Razor/Vega Harness Schematics

  Herewith harness schematics and wiring for the available harness for the N16 Nav Radio. The harness allows it to be connected via the MGL NAV/COM CAN bus to other MGL Nav radios (N16), Com Radios (V16) and Vega/Razor Control Heads. Available as a ...

• iEFIS Harness Wiring Schematics

  Attached are iEFIS / iBox CAN bus harness schematics that detail connecting up the system. The iBox is connected to all devices, such as the AHRS SP-7 and SP-6, the autopilot servos, the RDAC XF, etc., via the CAN bus. There are 2 CAN buses per iBox ...

• XTreme EFIS Harness Wiring Schematics - CAN bus

  Attached below are the harness schematics and pin-outs to connect the XTreme EFIS. Same harness can be used for XTreme EMS (but no AHRS sensors or servos connected). Simple XTreme EFIS/EMS and RDAC harness schematic here. ​