Vega COM/NAV Control Head Manual
Attached is the manual for the Vega 2 1/4" Controller for MGL Avionics VHF Com and Nav radio transceivers
Related Articles
N16 and Razor/Vega Harness Schematics
Herewith harness schematics and wiring for the available harness for the N16 Nav Radio. The harness allows it to be connected via the MGL NAV/COM CAN bus to other MGL Nav radios (N16), Com Radios (V16) and Vega/Razor Control Heads. Available as a ...
Blaze, Vega, Vega Control, Razor Updates
Updating the lineup of Blaze, Vega, Vega Control and Razor VHF/Intercom devices is done via RS-232 on a PC. Due to the generally increased complexity of updating these products, we advise our customers to contact us and setup an appointment to send ...
IOX Manual
Attached is the manual for the In/Out Extender / IOX / IOEX
Vega Single Manuals
Attached are the manuals of the 2 1/4" Vega Color Singles Applies to: AHRS-1 AHRS-3 ALT-5 ASI-4 ASV-1 EMS-1 FF-4 INFO-1 MAP-3 RPM-1 TC-4 TP-3
MGL V16 Com Radio Connection to iBox (iEFIS system)
To connect an MGL Avionics V16 radio to the iBox for remote control and remote frequency selection, please use this example schematic below (setups at bottom of page). Notes: Use iBox RS-232 channels 3, 4 or 5 (save channels 1 and 2 for high speed ...