XTreme EFIS Weights and Current Draws

XTreme EFIS Weights and Current Draws

Below are the system weights and Current loads of the XTreme mini EFIS/EMS. We recommend putting the EFIS system components on a 5 Amp Circuit Breaker. If radio and transponder are used, these can be placed on another 5 Amp Circuit breaker. If autopilot is used, both servos can share another 5 Amp Circuit Breaker.

 


XTreme mini EFIS
ozgramsAmps
XTreme EFIS11.4323200 mA
SP-74.412450mA (Heater Off) and 120 mA (Heater On)
SP-64.412450mA (Heater Off) and 120 mA (Heater On)
RDAC XF12.736180mA
ozgrams
Total32.9932Recommend 1 x 5 Amp Circuit Breaker for entire XTreme system
lbskg
Total in lbs and kg2.060.93
    • Related Articles

    • iEFIS Discovery-Lite Weights and Current Draws

      Below are the system weights and Current loads of the iEFIS Discovery-Lite. We recommend putting all EFIS-Lite system components on a 3 or 5 Amp Circuit Breaker. If radio and transponder are used, these can be placed on another 5 Amp Circuit breaker. ...
    • iEFIS Challenger and Explorer Weights and Current Draws

      Below are the system weights and Current loads of the iEFIS Explorer and Challenger. We recommend putting all EFIS system components on a 5 Amp Circuit Breaker. If radio and transponder are used, these can be placed on another 5 Amp Circuit breaker. ...
    • XTreme EFIS Manual

      Attached is the manual for the XTreme mini EFIS
    • XTreme EFIS/EMS Dimensions Dimensions

      Attached are the dimensions and size of the XTreme EFIS and EMS
    • XTreme Generation 2 Updates

      Here you will find updates for your XTreme EFIS and EMS Generation 2 units.  If you have a Generation 1 unit please check the Gen 1 XTreme Update page here You can tell the difference by looking at the version number at startup. If you have a ...