iEFIS Generation 3 Updates

iEFIS Generation 3 Updates

The latest iEFIS G3 Software updates are contained here. These updates apply to the regular iEFIS G3 and the iEFIS Lite.

iEFIS G2 Users can find their updates here
iEFIS MX1 Users can find their updates here

Current version:

iEFIS G3 Application Software: D 1.1.2.3
FlightOps System G3 iEFIS: 1.0.0.4
iBOX Firmware Version: 21

Also Included:

SP-10 Version 080714
RDAC XF Version 310714
SP-12 Version 100119
TRIG Interface Version 250919

Changes (iEFIS):

13 June 2023 Version 1.1.2.3
This update contains accumulated fixes and additions throughout the EFIS since the previous release.

Automated missed approach based on RPM now working correctly in all cases (mostly relevant for GLS approach with AP engaged).

Holds will now resume previous navigation (active waypoint or active GLS approach etc) if canceled. Hold cancel moved to NAV menu for faster access.

Minor changes to holds activated in active flightplan - changing a hold to a different waypoint will now activate it as right hand hold without going through menu. Tapping on hold will bring up selection (flip left/right hold and cancel). Note holds activated from within flightplan are always racetrack with 1 minute legs aligned with track (you can change hold direction using GPSOBS knob.

Fixes related to numeric entry of lat/long in certain modes. Fixes to deletion of waypoints in supplemental database in relation to flight planning tool.

Bus monitor addition to restart stalled communications related to internal devices - affects mostly “lite” systems, improves robustness.

Changes throughout system to accomodate longer filenames - made necessary due to longer filenames with PocketFMS plate system. Filenames may now be up to 63 characters long (up from 31 previously).

Changes (iBOX):

Version 21 fixes a calculation error related to using the non-linear ASI correction functions below 50mph or airspeed. Note: this update is only relevant if you use these functions in the instruments setup menu.

Installation:

To install, download the update package which contains software for all iEFIS components and update instructions. 

    • Related Articles

    • iEFIS Generation 2 Updates

      The latest iEFIS G2 Software updates are contained here. These updates apply to the regular iEFIS Challenger and Explorer G2. iEFIS G3 Users can find their updates here iEFIS MX1 Users can find their updates here Current version: iEFIS G2 Application ...

    • iEFIS MX1 Updates

      The latest iEFIS MX1 Software updates are contained here. These updates apply to the iEFIS MX1 in either Landscape or Portrait modes. NOTE: Landscape Mode software updates contain "LS" in the file names. iEFIS G2 Users can find their updates here ...

    • XTreme Generation 2 Updates

      Here you will find updates for your XTreme EFIS and EMS Generation 2 units.  If you have a Generation 1 unit please check the Gen 1 XTreme Update page here You can tell the difference by looking at the version number at startup. If you have a ...

    • XTreme Generation 1 Updates

      Here you will find updates for your XTreme EFIS and EMS Generation 1 units.  If you have a Generation 2 unit please check the Gen 2 XTreme Update page here You can tell the difference by looking at the version number at startup. If you have a ...

    • Free Database Updates

      NOTICE 08/30/2021 - ATTENTION MGL CUSTOMERS: Michigan Avionics is excited to announce that the US Navidata is once again being updated and is available for download! Also, the FAA has recently started publishing VFR sectionals on a 56-day basis ...