Simulator: Function Not Available In Flight

This article relates to use of the MGL Avionics iEFIS Simulator (not the actual EFIS).

If you get the message "Not Available in Flight" when trying to adjust settings in the Simulator Menu, this is because the unit has detected it is in flight mode. So, in the SIMULATOR, simply drag the AIRSPEED slider in Sensor Simulation > Show Pressure Sensors DOWN so that your airspeed is zero:

If that does not work, hit ACTION > END CURRENT FLIGHT.

• Related Articles

• Flight-2 Velocity Single Manual

  Attached is the Flight-2 Manual  ​

• SP-6 In-Flight Calibration Manual

  The manual for the SP-6 Magnetometer Magnetic Compass In-Flight Calibration procedure is attached. This outlines the process for updating and calibrating the SP-6 with the newer in-flight calibration software.

• MGL iEFIS Flight Data Recording Tool Manual

  The iEFIS records all flight, engine and other data at 1 Hz to the iEFIS.rec recording file located on the front-mount SD card in the EFIS. The MGL EFIS Recording Tool for Windows (download here: http://www.mglavionics.co.za/tools.html) allows ...

• iBox and iEFIS Extender Analog Inputs Remote Control Functions

  The iBox and iEFIS Extender Analog Inputs have a selection of Remote Control Functions available by selection. These functions are normally activated with hat switches and buttons on the control stick. Applying Power to one of the Analog/Digital ...

• Odyssey and Voyager Interactive Map and Flightplan Tool Manual

  Attached is the manual for the Interactive Map and Flight Planning Tool function of the Odyssey and Voyager (Gen 1 and Gen 2