iEFIS MX1 Updates

iEFIS MX1 Updates

The latest iEFIS MX1 Software updates are contained here. These updates apply to the iEFIS MX1 in either Landscape or Portrait modes.
NOTE: Landscape Mode software updates contain "LS" in the file names.

iEFIS G2 Users can find their updates here
iEFIS G3 Users can find their updates here

Current Version (Portrait Mode):

iEFIS MX1 Application Software: 16
FlightOps System MX1: 0001007

Current Version (Landscape Mode):

iEFIS MX1 Application Software: 16
FlightOps System MX1: 0001807

Changes (iEFIS):

19th August 2022 Version 16
​
Added alternative method to display differential fuel flow (FF1 - FF2). Original method results in a special text item with the calculation result you can use in a custom screen design. New alternate method sets FF1 = FF1 - FF2. This is selected in the Fuel flow 1 setup menu if differential fuel flow is checked (new menu item will appear), In the new method is used - the RDAC diagnostics menu will still show original FF1 and FF2 flow values for trouble shooting or calibration purposes.

Installation:

To install, download the update package which contains software for all iEFIS components and update instructions. 

NOTE: The iEFIS MX1 application software (User Interface) is a separate update file from the Operating System (FlightOps). Users should only update the FlightOps software if necessary to avoid any unnecessary configuration losses. The iEFIS MX1 will notify you if an Operating System update is required.

Switch to Landscape Mode:

Install both the application software and operating system for the landscape mode operation of the MX1 by downloading both of the MX1_LS files below and updating as per the above instructions.


    • Related Articles

    • iEFIS Generation 3 Updates

      The latest iEFIS G3 Software updates are contained here. These updates apply to the regular iEFIS G3 and the iEFIS Lite. iEFIS G2 Users can find their updates here iEFIS MX1 Users can find their updates here Current version: iEFIS G3 Application ...

    • iEFIS Generation 2 Updates

      The latest iEFIS G2 Software updates are contained here. These updates apply to the regular iEFIS Challenger and Explorer G2. iEFIS G3 Users can find their updates here iEFIS MX1 Users can find their updates here Current version: iEFIS G2 Application ...

    • V16 Radio Updates

      The MGL Avionics V16 Radio firmware updates can be found here. Current Version: 300420 (Version 12) Changes: V16 Firmware update 300420 (V1 REL 12) Added a block to AUX audio at codec level during TX. Added automatic selection of HOT MIC during TX if ...

    • Free Database Updates

      NOTICE 08/30/2021 - ATTENTION MGL CUSTOMERS: Michigan Avionics is excited to announce that the US Navidata is once again being updated and is available for download! Also, the FAA has recently started publishing VFR sectionals on a 56-day basis ...

    • XTreme Generation 2 Updates

      Here you will find updates for your XTreme EFIS and EMS Generation 2 units.  If you have a Generation 1 unit please check the Gen 1 XTreme Update page here You can tell the difference by looking at the version number at startup. If you have a ...