SP-6 and SP-7 Pinouts - Wiring

Here are wiring connections for the DB9 connector pins for the SP-6 magnetometer and the SP-7 attitude sensor (AHRS)

• Related Articles

• Old SP-2 and SP-4 Pinouts

  Here are wiring connections for the DB9 connector pins for the SP-2 magnetometer and the SP-4 or SP-5 attitude sensor (AHRS) ​

• SP-12 TABS GPS Manual and Harness Schematic and ADS-B setup manual

  Below is the manual and wiring schematic (for the available harness) for the MGL Avionics SP-12 GPS (for 2020-compliant position sourcing for ADS-B Out devices for Experimentals and LSAs). Also, the iEFIS Mode-S and ADS-B Setup Instructions are ...

• SP-6 and SP-7 Installation Manual

  The SP-6 and SP-7 User and Installation Manual is attached for customers wishing to install these units in their aircraft

• SP-9 AHRS Manual

  Attached is the manual for the SP-9 AHRS Sensor. SP-9 AHRS High grade ring gyro based AHRS and built in SP-6 magnetometer for magnetic heading. The SP-9 employs latest micro-machined ring gyroscope technology for performance that approaches FOG class ...

• iEFIS Harness Wiring Schematics

  Attached are iEFIS / iBox CAN bus harness schematics that detail connecting up the system. The iBox is connected to all devices, such as the AHRS SP-7 and SP-6, the autopilot servos, the RDAC XF, etc., via the CAN bus. There are 2 CAN buses per iBox ...