Transponder Encoder Harness Schematics
Attached are Schematics for wiring connections for connecting the MGL Avionics iEFIS, Odyssey, Voyager, Enigma EFIS to the following transponders:
- Garmin GTX320A
- Garmin GTX327
- Garmin GTX330
- Bendix/King KT-76A
- Microair T2000
Related Articles
V10 Radio Harness Schematics
Attached are harness schematics for connecting up Single Place, 2-place and 4-place harnesses for wiring the V10 Radio (and a dual radio harness schematic) V6 Radio Harness Schematics
Attached are harness schematics for connecting up Single Place, 2-place and 4-place harnesses for wiring the V6 Radio iEFIS Harness Wiring Schematics
Attached are iEFIS / iBox CAN bus harness schematics that detail connecting up the system. The iBox is connected to all devices, such as the AHRS SP-7 and SP-6, the autopilot servos, the RDAC XF, etc., via the CAN bus. There are 2 CAN buses per iBox ...XTreme EFIS Harness Wiring Schematics - CAN bus
Attached below are the harness schematics and pin-outs to connect the XTreme EFIS. Same harness can be used for XTreme EMS (but no AHRS sensors or servos connected). Simple XTreme EFIS/EMS and RDAC harness schematic here. V16 and Razor/Vega Harness Schematics
Attached are harness schematics for connecting up a 2-place (or single place) harness for wiring the V16 COM Radio and connecting to Razor and Vega Control Heads. Harness available for purchase from MGL Avionics.