Integrations
Using VAL Avionics Radios with MGL EFISs
This is a placeholder article for a future more complete version. This article contains just a couple of points, hopefully to save a little time in wiring these radios up. 1. The pin out of the older COM2000 manuals is WRONG for the serial port pins. ...
Setup of the Navworx ADS600-EXP ADS-B with the iEFIS and iEFIS Lite
First, wire the Navworx to the iEFIS according to this article. The article shows using the Navworx with the Sandia transponder, but other transponders can be used. Then, follow the instructions below: Note: With the Navworx ADS600-EXP (Experimental ...
Navworx ADS600-B ADS-B Integration Guide
Attached is the Integration Document for Navworx ADS600-B ADS-B (certified unit) and MGL Avionics Odyssey or Voyager Gen 2 EFIS, and iEFIS. Draft document by Cecil Jones. Also attached is a connection schematic for the iEFIS and the Navworx ADS600-B ...
Transponder Encoder Harness Schematics
Attached are Schematics for wiring connections for connecting the MGL Avionics iEFIS, Odyssey, Voyager, Enigma EFIS to the following transponders: Garmin GTX320A Garmin GTX327 Garmin GTX330 Bendix/King KT-76A Microair T2000
Garmin GNS430W / GNS530W Integration Document
Attached is the Integration Document for GNS 430W and MGL Avionics Odyssey or Voyager Gen 2 EFIS and the iEFIS. Document by Cecil Jones.