V16
Setting up an MGL V16 with an audio Panel
There are some common issues our customers run into when hooking the V16 up to an audio panel. This video will explain some of these common pitfalls and how to overcome them.
Using the V16 VHF COM Radio with an Audio Panel
The V16 VHF radio is a great companion with audio panels and external intercoms alike. When installing a V16 radio with the intention of using it behind an audio panel or intercom, it is important to properly configure the V16's settings for optimal ...
V16 and Razor/Vega Harness Schematics
Attached are harness schematics for connecting up a 2-place (or single place) harness for wiring the V16 COM Radio and connecting to Razor and Vega Control Heads. Harness available for purchase from MGL Avionics.
MGL Avionics V16 COM Radio ICD
Attached is the Interface Control Document for the V16 Aviation Airband Transceiver
MGL Avionics V16 Com Radio Manual
Attached is the manual for the MGL Avionics V16 Remote Aviation Transceiver
iEFIS-Lite to V16 RS-232 Connection Diagram
Below is the connection diagram diagram for the iEFIS-Lite to V16 Com Radio. You can use either RS-232 Port 1 OR RS-232 Port 2 on the iEFIS-Lite (Discovery-Lite, Explorer-Lite, Challenger-Lite). You can also use any of the RS-232 Ports on the iEFIS ...
MGL V16 Com Radio Connection to iBox (iEFIS system)
To connect an MGL Avionics V16 radio to the iBox for remote control and remote frequency selection, please use this example schematic below (setups at bottom of page). Notes: Use iBox RS-232 channels 3, 4 or 5 (save channels 1 and 2 for high speed ...