Transponder & ADS-B
SP-12 TABS GPS Manual and Harness Schematic and ADS-B setup manual
Below is the manual and wiring schematic (for the available harness) for the MGL Avionics SP-12 GPS (for 2020-compliant position sourcing for ADS-B Out devices for Experimentals and LSAs). Also, the iEFIS Mode-S and ADS-B Setup Instructions are ...
Setup of the uAvionix EchoUAT ADS-B with the iEFIS and iEFIS Lite
First, wire the EchoUAT to the iEFIS according to this article. The article shows using the EchoUAT with the Sandia transponder, but other transponders can be used. Then, follow the instructions below: Note: With the EchoUAT, the EFIS does NOT ...
Harness Schematic for Sandia STX-165R and uAvionix EchoUAT ADS-B
Attached is the schematic for connecting both the uAvionix EchoUAT ADS-B and the Sandia STX-165R Remote Mode C Transponder. The RS-232 wires from the STX-165R can be connected to any channel on the iBox or any channel on the iEFIS Lite or iEFIS ...
Trig TY91 / TY92 Radio Interface Manual
Attached is the manual for connecting the iEFIS and iEFIS Lite to the Trig TY91 and TY92 radio for remote control.
Trig TT21 / TT22 Remote Mode-S Transponder Connection Manual
Attached is the manual for connecting the Trig Remote Mode-S Transponder to the MGL Avionics Odyssey/Voyager and iEFIS systems. This solution provides a simple-to-use interface for a Trig Avionics TT21 or TT22 transponder. MGL Avionics have an ...
Harness Schematic for Sandia STX-165R and Navworx ADS600-EXP ADS-B
Attached is the schematic for the available combined H-Navworx/STX165R harness for connecting both the Navworx ADS600-EXP ADS-B (Experimental) and the Sandia STX-165R Remote Mode C Transponder. The RS-232 wires from the STX-165R can be connected to ...
Sandia STX 165R Remote Mode-C Transponder Connection Manual
Attached is the manual for connecting the Sandia STX 165R Remote Mode-C Transponder to the MGL Avionics Odyssey/Voyager, XTreme and iEFIS systems. Also attached is the harness schematic for the unit. Note: Only the remote-mount STX 165R (and not the ...
CNV-AT, CNV-ALT and CNV-ALT2 Manuals
Attached are the manuals for the CNV-AT and CNV-ALT2 serial to parallel gray code converters, and the NEW CNV-ALT converter.
Transponder Gray Code (Gillham Code) Reference
This reference shows the Gray Code output of an altitude encoder (including the gray code outputs on all MGL Avionics equipment that outputs it). This can be used to trouble shoot harnesses and encoders. Some transponders will display the gray code ...