iEFIS
iEFIS and iBox User and Installation Manuals
The iEFIS and iBox Installation, Navigation and User Manuals are attached
iEFIS Challenger and Explorer Weights and Current Draws
Below are the system weights and Current loads of the iEFIS Explorer and Challenger. We recommend putting all EFIS system components on a 5 Amp Circuit Breaker. If radio and transponder are used, these can be placed on another 5 Amp Circuit breaker. ...
iEFIS Harness Wiring Schematics
Attached are iEFIS / iBox CAN bus harness schematics that detail connecting up the system. The iBox is connected to all devices, such as the AHRS SP-7 and SP-6, the autopilot servos, the RDAC XF, etc., via the CAN bus. There are 2 CAN buses per iBox ...
iEFIS: Installing Custom Screen Designs
When installing Custom Screen Designs that may have been sent to you in a Zipfile, follow these instructions Instructions: • Save Zipfile to PC • Unzip file and save contents of file to folder on PC • Copy all FILES from this folder and paste onto SD ...
iEFIS Standard System Selections
To setup your iEFIS and iEFIS Lite display (when using standard screen layouts - not custom) for the engine you have (example Lycoming 4/6-cyl, or Rotax or Jabiru/other 4/6 cylinder) and to setup the number of fuel tanks you have and whether you have ...
iEFIS Altimeter Calibration Manual
Attached is the iEFIS Altimeter Calibration Manual
iEFIS Video Showing What is in the Box, and CAN bus wiring
Video showing what you get in the box when you order an iEFIS with iBox. Video also describes how our available harness system connects devices on the CAN bus network.
iEFIS Plates Manual
Attached is the iEFIS and iEFIS-Lite Plates manual
iEFIS LCD Display Dimensions
Below are the LCD screen dimensions for the iEFIS Challenger, Explorer and Discovery displays: Challenger (and Lite): GENERAL SPECIFICATIONS Ratio 4:3 Active Area 210.4 (H) x 157.8 ...
iEFIS Discovery-Lite Weights and Current Draws
Below are the system weights and Current loads of the iEFIS Discovery-Lite. We recommend putting all EFIS-Lite system components on a 3 or 5 Amp Circuit Breaker. If radio and transponder are used, these can be placed on another 5 Amp Circuit breaker. ...
iEFIS Ground Proximity and Flap Overspeed Setup Manual
Attached is the manual for the iEFIS Ground Proximity and Flap Overspeed setup.
iEFIS VSI and AOA Tone Generator Manual
Attached is the manual for the iEFIS VSI (variometer) and AOA (angle of attack) tone generator
iEFIS Rotorcraft Setup Manual
Attached is the manual for rotorcraft (helicopter and gyrocopter) setup for the iEFIS and iEFIS Lite.
iEFIS Panel Dimensions
Attached are the cutout panel dimensions and sizes of the iEFIS Challenger, Explorer and Discovery (Lite versions are the same size as regular units).
iEFIS Screen Designer Manual
The iEFIS Screen Designer Manual (alteration guide describing how to design custom screens for your iEFIS) is attached